The latest production technology of Moldova ceramic (Moldovan - ceramica) were used in the first half of the 80's. Then the ceramic has found wide application in internal and external decoration of houses. Manufacture of ceramic is in mixing, extrusion, under very great pressure and burning of two high quality clays, with the highest temperatures. Previously in this mixture is added the natural Coloring pigments, particles of quartz and feldspar. Under the influence of such a high temperature sintered clay mass, resulting in the formation of ceramic (it's not trouve). This is an extremely durable, vitrofitsirovanny, non porous material, which is a pattern throughout its depth. Manufacture of ceramic- an accelerated version of natural stone in the educational environment. As for ceramic requires much less time and material, the use of more appropriate than the application of natural stone. In addition, ceramic has a high technical performance and some unique properties. For opaque ceramic, it is not subjected to additional processing after the firing. The surface of such material is not shiny, but has a high rate of hardness. Further processing of ceramic granite for polished texture makes the surface more brilliant, but at the same time reducing the wear resistance. In order to maintain a larger firm, as is the case with natural stone, ceramic need to regularly use special putty, creating a protective layer on the surface. For the production of ceramic rectify the size of each burnt tiles calibrated, ie All nervousness beveled edges. The result is a material that forms when laying flat seamless surface. Ceramic covered with enamel and burnt. Then its glaze. This technology allows us to get glazed texture, imitating marble, travertine, wood, ceramics and having a bright pattern of staining without costly pass-through. But because such a short layer of ceramic glaze should not be used in public places with a large cross. Ceramic is often used for exterior trim and cladding of buildings due to its very low water absorption rate - 0.05%, significantly lower than that of any other ceramic material, or even natural stone. This feature allows you to apply the ceramic in any climatic zone.