Laser cutting can reduce unit costs by decreasing set up times and lowering tooling expense.

Plasma cutting is a process that is used to cut steel and other metals using a plasma torch. In this process, an inert gas is blown at high speed out of a nozzle; at the same time an electrical arc is formed through that gas from the nozzle to the surface being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut. Plasma can also be used for plasma arc welding and other applications.
Can be programmed from your drawings, patterns or emailed DXF files. A vacuum lifter has been installed for protection of delicate materials.  Fast and accurate cutting using the latest computer technology.

Robot welding is a relatively new application of robotics, even though robots were first introduced into US industry during the 1960s. The use of robots in welding did not take off until the 1980s, when the automotive industry began using robots extensively for spot welding. Since then, both the number of robots used in industry and the number of their applications has grown greatly. Cary and Helzer suggest that, as of 2005[update], more than 120,000 robots are used in North American industry, about half of them pertaining to welding. Growth is primarily limited by high equipment costs, and the resulting restriction to high-production applications.

Wigley Engineering has grown from a small family engineering company into a well established business providing laser cutting, plasma cutting, brake press forming, robot welding and other engineering services, with reliable 'on-time' deliveries at competitive prices.

You can have all of these services at;

Wigley Engineering Pty Ltd
16 Zenith Road
Dandenong VIC 3175
Phone: (03) 9794 8311
Fax: (03) 9794 5809
Email:
<a href="sales@wigleyengineering.com.au">sales@wigleyengineering.com.au</a>