Another point we need to note that the ink storage environment is also a key impact on the use of ink. Some people think that as long as I can be good at room temperature control, storage, where ink is not important, in fact not, because if the ink stored in low temperature environment will improve the lot of its viscosity, but there will be lower flows in many, Raising the temperature can rapidly improve the mobility of ink but will not ink viscosity is the result of temperature increase and decrease rapidly. The higher viscosity ink will head the internal damage caused by the piezoelectric ceramic nozzle fatigue appeared, such as inkjet screen erected there, and other phenomenon. In addition, dry weather will also affect the normal use of ink. Under normal circumstances the north have indoor heating in winter, this environment can only maintain indoor relative humidity at 20 percent, while demand for equipment and ink for 40 percent relative humidity in terms of this is obviously not enough. The dry climate in the end will cause what kind of negative impact it » Many people will have such doubts. Here, I seen the shows, first of all, dry environment electrostatic higher and higher electrostatic equipment not only to a greater harm, the use of ink will also create a certain impact, for example-are serious, such as Mexico. There is ink solvent for the volatile liquid, dry air at the rate of evaporation will be accelerated, guns and fast-drying ink on guitar, plug the nozzle caused the phenomenon occurred in the course of performance for the inkjet ink-jet and frequent disconnection and skew phenomenon Occurred, if do not pay attention to maintaining a sprinkler head may be damaged. Thus winter indoor wetting is very important.